Features | Description |
WAN | One 10/100 Mbps RJ-45 connector for WAN port |
LAN | Four 10/100 Mbps RJ-45 connectors for LAN ports |
Wireless | Built-in 802.11n wireless access point (two antennas) |
LED | LAN1-4, WPS, Wireless, WAN, Power, and Do-Not-Disturb indication |
Buttons/switches | Power, RESET, WPS, Wireless, and Do-Not-Disturb mode control |
Do-Not-Disturb button | The Do-Not-Disturb button is used to turn the LEDs on the front panel on and off. Turning this button on or off will not affect the normal operation of the CVR100W. When this button is turned on, all lights on the front panel are off and the Do-Not-Disturb indication light on the back panel is solid green. When this button is turned off, all lights on the front panel are on and the Do-Not-Disturb indication light on the back panel is off. |
Product dimensions (W x H x D) | 106 in. x 94 in. x 26 in. (270 mm x 238.6 mm x 66 mm) |
Weight | 0.84 lb (0.38 kg) |
Power supply | 12V/0.5A |
Cabling type | Category 5e or better |
Certifications | SRRC, CE, CB, Wi-Fi |
Operating environments | Operating temperature: 0° to 40°C (32°to 104°F) Storage temperature: -30° to 60°C (-22° to 140°F) Operating humidity: 10% to 85% noncondensing Storage humidity: 5% to 95% noncondensing |
Features | Description |
Routing | Static routing Routing Information Protocol (RIP) versions 1 and 2 Inter-VLAN routing |
Layer 2 | 802.1Q-based VLAN 6 active VLANs (VLAN ID Range: 4 to 4094) |
Layer 3 | Dynamic Host Configuration Protocol (DHCP) Server Point-to-Point Protocol over Ethernet (PPPoE) Point-to-Point Tunneling Protocol (PPTP) pass-through Layer 2 Tunneling Protocol (L2TP) pass-through DHCP relay agent IGMP proxy and snooping Dynamic Domain Name System (DynDNS): oray.com and 3322.org Network Access Translation (NAT) and Port Address Translation (PAT) Port management Port mirroring |
IPv6 | IPv4/IPv6 dual stacks IPv6 to IPv4 tunneling Multicast Listener Discovery (MLD) for IPv6 (RFC2710) Stateless address auto-configuration (SLAAC) DHCPv6 Server for LAN IPv6 clients DHCPv6 Client WAN connection Internet Control Message Protocol (ICMP) version 6 IPv6 static routing RIP Next Generation (RIPng): IPv6 Dynamic Routing |
Security | Stateful packet inspection (SPI) firewall Port forwarding and port triggering Access control lists (ACL) and content filtering DoS prevention Wireless MAC address filtering Static URL or keyword filtering Access control by schedule Web-based configuration utility (HTTP and HTTPS) Self-signed SSL certificateuting |
VPN | Up to 3 IPsec VPN tunnels by using the Cisco QuickVPN software PPTP, L2TP, and IPsec VPN passthrough 1 IPsec site-to-site tunnel |
Quality of service | 802.1p-based priority on LAN ports and application-based priority on WAN ports 4 queues Differentiated services code point (DSCP) Class of service (CoS)) Bandwidth control |
Management | Local logs, system logs, and remote logs Upgrade the firmware from the web-based device manager Import and export system configuration (.txt) Remote management using the HTTP or HTTPS protocol) Bonjour and Universal Plug and Play (UPnP) Network diagnostics: Ping, traceroute, and DNS lookup |
Performance | NAT throughput: 90 Mbps Maximum new connections: 750 Maximum concurrent connections: 15,000 VPN throughput: 5 Mbps |
Features | Description |
Wireless radio | IEEE 802.11n wireless access point; complies with 802.11b/g Wireless radio modes: 802.11b: Direct-Sequence Spread Spectrum (DSSS) 802.11g/n: Orthogonal Frequency-Division Multiplexing (OFDM) 2 built-in omnidirectional antennas with 1.8 dBi gain Wireless channels: 13 selectable wireless channels Automatic channel selection Transmit power: 802.11b: 17 dBm +/- 1.5 dBm 802.11g: 15 dBm +/- 1.5 dBm 802.11n: 12.5 dBm +/- 1.5 dBm Receiver sensitivity: -87 dBm at 11 Mbps -71 dBm at 54 Mbps -68 dBm at msc15, HT20; -66dBm at mcs15, HT40 |
Wireless adjustment | Press the Wireless button to enable or disable the wireless module Adjustable Wi-Fi power: OFF, 50%, 100% |
Wireless Distribution System (WDS) | Up to 3 wireless access points to repeat the wireless signals |
Wi-Fi Multimedia (WMM) | WMM (802.11e) and WMM Power Save (U-APSD) |
Maximum number of connected wireless client stations | 32 active wireless client stations simultaneously |
Maximum number of active SSIDs | 4 active SSIDs simultaneously |
Isolation | Station isolation |
Security | Wi-Fi Protected Setup (WPS) 2.0 Wired Equivalent Privacy (WEP) Wi-Fi Protocted Access (WPA)-Personal/Enterprise WPA2-Personal/Enterprise |
Cisco Simple Connect | Provides a safe and convenient way for smart devices to connect internet via CVR100W. |